wonderbar c1 - NCRS Discussion Boards

wonderbar c1

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Sander B.
    Expired
    • March 1, 2005
    • 499

    wonderbar c1

    Hello All !

    i wonder how i should remove the push buttons and bar from the radio
    i have a new face kit from C.C. but these are with screws

    maybe there is some good trick to do this
    before i will make some mistakes

    please let me know
    thank you as always Sander,
  • John M.
    Expired
    • January 1, 1999
    • 1553

    #2
    Re: wonderbar c1

    Sander,
    If you look at where the shaft goes up into the buttons, you will see a shoulder on the shaft. Just insert a flat screwdriver in the space between the shoulder and the button and twist the screwdriver. This will wedge the button off, and usually after it has moved 1/4 inch or so, it will just slide off.

    Regards, John McGraw

    Comment

    • Sander B.
      Expired
      • March 1, 2005
      • 499

      #3
      Re: wonderbar c1 mission accomplished

      thanks john

      Comment

      Working...
      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"