Does anyone know if there any reference source to help identify C1 fasteners and where used by head markings, finishes, sizes and thread counts? I have a poster from Paragon that is helpful but not complete by itself.
-
-
Re: Is there a C1 Fastener ID manual ?
Clare,
I have compiled a list and catalogue of the bolt head markings, finishes, sizes and thread count that for years now I have been trying to put into an article for the restorer magazine. I have compiled this information from my own restorations along with about a dozen other individuals who took the effort to do the same
As you can guess this is not a small amount of information that does not easily transcribe itself into a two page article, so it has not been publised. Email me at Rickb1873@aol.com and we can discuss offline how to get the information to you.
Richard Brodeur
NCRS#4779 -
Re: Is there a C1 Fastener ID manual ?
There are probably a lot of people interested in this subject including myself. Can I get on the information? I am at wilesa@drmc.drhsi.org.
AllenComment
-
Re: Is there a C1 Fastener ID manual ?
I would like to add my name to the "wish list" - It would certainly seem reasonable to pay something to cover the cost of reproducing and shipping the information.Comment
-
Re: Is there a C1 Fastener ID manual ?
Put my name on that list, would gladly pay for time and trouble.
TerryComment
-
The response has been overwhelming.........
to my offer to supply Clare with a copy of the head bolt markings, resuling in my email being flooded with request for a copy of my document.
To all of the individuals who have emailed me (and there are many)I will attempt to create a version that is more easily copied. At the moment we are talking about a 2 inch stack of paper, and with 50 or so copies a lot of trees will be sacrificed (along with a lot of postage) to make this happen.
Bottom line, be a little patient while I come up with a plan to meet this request.
Richard Brodeur
NCRS # 4779Comment
-
Re: Is there a C1 Fastener ID manual ?
I responded by a post and did not want to send you an individual e mail. Please make sure I am also on the list. Happy to pay for this information.
Allen
wilesa@drmc.drhsi.orgComment
Comment