C2 - 63 Washer Pump Rebuild

[Harry Sadlock]

Greetings all, I'm in the process of rebuilding my washer pump. Finished the diaphragm and just about to install the nozzle when I decided to lookup how the nozzle is positioned. After looking at the Shop Manual, AIM, Noland Book and a few on Ebay, they are all installed differently.

Question is, what is the correct way to install the nozzle on a 63 pump. Water input side up, down, right (cowl side) or left (towards the front of the car)

Thanks

Harry

38513

[Mike Cobine]

Re: C2 - 63 Washer Pump Rebuild

When all is done and installed in the car, the center nozzle should be forward, the outer nozzles should be at top and bottom to the rear, all facing the driver's side.


If you looked at it from the driver's side fender, you would see this:

top
----------
| O |
front | |
of | O |
car | |
| O |
----------
bottom





Hope that helps.

[Mike Cobine]

Re: C2 - 63 Washer Pump Rebuild

When all is done and installed in the car, the center nozzle should be forward, the outer nozzles should be at top and bottom to the rear, all facing the driver's side.


If you looked at it from the driver's side fender, you would see this:

top
----------
| O |
front | |
of | O |
car | |
| O |
----------
bottom





Hope that helps.

[Harry Sadlock]

Re: C2 - 63 Washer Pump Rebuild

Mike, Thank You

Harry

[Harry Sadlock]

Re: C2 - 63 Washer Pump Rebuild

Mike, Thank You

Harry

[Michael H.]

Excellent Reply

Mike....excellent diagram. That was brilliant! I would never have thought of doing that.

[Michael H.]

Excellent Reply

Mike....excellent diagram. That was brilliant! I would never have thought of doing that.