'65 Fuelie coupe: non-posi? - NCRS Discussion Boards

'65 Fuelie coupe: non-posi?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Mark F.
    Expired
    • March 1, 2002
    • 174

    '65 Fuelie coupe: non-posi?

    A friend in British Columbia is considering buying a '65 coupe. The engine and trans are missing, but the owner says that the car is otherwise original. The differential is a 3.36 non-posi.

    Was a non-posi available on an L-84?

    Thanks for your input.

    Mark
  • Joe L.
    Beyond Control Poster
    • February 1, 1988
    • 43221

    #2
    Re: '65 Fuelie coupe: non-posi?

    Mark------

    Positraction was not required with the L-84 engine option but ONLY if the standard ratio of 3.70:1 was specified. If the optionally available ratio of 3.36:1 was ordered, then positraction had to be ordered, too.
    In Appreciation of John Hinckley

    Comment

    • Mark F.
      Expired
      • March 1, 2002
      • 174

      #3
      Thanks, Joe. *NM*

      Comment

      • Duke W.
        Beyond Control Poster
        • January 1, 1993
        • 15677

        #4
        Re: '65 Fuelie coupe: non-posi?

        In '63 and 64 you could order any optional engine with the base three-speed manual transmission. The standard axle ratio was 3.36. There were no optional ratios, but you could order the three-speed/3.36 combo with Positraction.

        If I am reading the NCRS Spec Guide Power Team Chart correctly, it appears that for 1965 any optional engine required ordering an optional transmission, so a L-84 3.36 without Positraction was not an availablee combination, but it was in '63 and '64.

        As Joe said, the base L-84/M-20 axle was 3.70 with an open diff., and this applied to '63 to '65. You could order the 3.70 with Positraction and ALL optional ratios required positraction with L-76 or L-74 combined with M-20.

        Duke

        Comment

        Working...
        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"