60 Vette Air cleaner on a holley or other carb

[Dave #34924]

Is there a way to put a 60 Vette air cleaner or at least something close on a Holley or other aftermarket Hi-po carb

[Verle R.]

Re: 60 Vette Air cleaner on a holley or other carb

Dave,

Holley inlet diameter is larger than your 60 carb.
At a minimum you will have to look for a carb base that will fit the holley and match the 60 air cleaner top diameter.

Verle

[Christopher R.]

Re: 60 Vette Air cleaner on a holley or other carb

No and yes. Go over to the C1 section on the Corvette Forum where this is being discussed right now.

I did this. Mated a junk EBay 3721 air horn (top) to a modern Edelbrock AFB (bottom). Voila! A carb that'll fit Holley intake bolt pattern manifolds and C1 air cleaners. Gas line and choke hooks right up too!