replacing starter on 76 - NCRS Discussion Boards

replacing starter on 76

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mike budra

    replacing starter on 76

    is this a tough job to do?
  • Harmon C.
    Extremely Frequent Poster
    • August 31, 1994
    • 3228

    #2
    Re: replacing starter on 76

    Mike Not a hard job only two bolts and a bracket in front. Make sure you mark the wires and don't mix them up as their are more than enough to get you in a fix if you mix them up. Disconnect the battery before you start!!!!!!! Lyle
    Lyle

    Comment

    • mike budra

      #3
      Re: replacing starter on 76

      well,got it off no problem.The dang thing looks pretty new too.It sounds to me like the solonoid isnt kicking in.You know,when you turn the key it just does that whinning sound....anyways,ill get another and give it a try.Does it usually pose a problem on these C3's that have headers on them?I mean with the heat and all.Thanks
      mike

      Comment

      Working...
      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"