C2 Water Pump Gasket Sealant - NCRS Discussion Boards

C2 Water Pump Gasket Sealant

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Rick S.
    Expired
    • January 1, 2003
    • 1203

    C2 Water Pump Gasket Sealant

    I'm getting ready to install my rebuilt water pump and I'm looking for any recommendations for gasket sealant and bolt sealant/tape for my 67 L79. Thanks in advance.
    Rick
  • Joe L.
    Beyond Control Poster
    • February 1, 1988
    • 43221

    #2
    Re: C2 Water Pump Gasket Sealant

    Rick-----

    I would use a VERY THIN coating of RTV on both sides of the gaskets (I use Permatex Ultra Copper, but just about any automotive RTV will work for these waterpump gaskets). I would use Locktite Pipe Thread Seal with Teflon on the bolts that go through to the water jacket. As an alternative, you could use Permatex Non-Hardening Sealer or Hylomar.
    In Appreciation of John Hinckley

    Comment

    • Louis Kolb

      #3
      Re: C2 Water Pump Gasket Sealant

      Non hardening Permatex works well as a gasket and thread sealer.

      Comment

      Working...
      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"