C1 - Tach/Speedo Cable Lengths - NCRS Discussion Boards

C1 - Tach/Speedo Cable Lengths

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Brad K.
    Expired
    • August 31, 1990
    • 414

    C1 - Tach/Speedo Cable Lengths

    Can anyone tell me the tach and speedo cable casing lengths for my '59 (270hp, generator drive with a BW T10) and if they should both have a wound steel exterior or vinyl/plastic cover.

    My car came equiped with a vinyl covered tach casing length of 61" and a speedo steel cased length of 69 1/2"......I don't think either of them are correct.

    Thanks,
    Brad
  • Dennis A.
    Expired
    • April 30, 1999
    • 1010

    #2
    Re: C1 - Tach/Speedo Cable Lengths

    Brad..
    speedometer

    59' 3-speed...steel case, 60 inches

    4-speed...steel case, 62 inches

    (auto-muncie)...steel, 68 inches
    Tach

    58-59 steel case,60 inches

    A black case (replacement) for 58-62 may have been used?
    I hope I'm correct on this one....for I have seen gray case cables on 60 -61's,however I'm sure black was correct.

    Comment

    Working...
    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"