C2 - NCRS Discussion Boards

C2

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Ken Root
    #1

    C2

    We just finished a body off restoration on a 1963 corvette. During the process we replaced all of the wiring and the gauges were redone. Our problem is, the fuel/battery/temperature gauges don't work. Everything else electrical on the car is working fine. The ground wire is connected to the back of the cluster. Is it possible I still might be having a ground problem or something else that we're missing? Any feedback would be greatly appreciated.
    Tags: None
      • Top
    • Joe R.
      Extremely Frequent Poster
      • July 31, 1976
      • 4550
      #2
      Re: C2

      Ken,

      Check the instrument cluster for the lights. If they illuminate the ground is OK. Check and see if the fuse is blown or 12V present at the gauges.

      Hope this helps,

      JR
        • Top

        Comment

        • Harry Sadlock
          #3
          Re: C2

          Ken, have you found the problem? I'm getting ready to put my 63 cluster in and I would like to know what you found.

          Thanks

          Harry
            • Top

            Comment

            Previous template Next
            Working...
            Searching...Please wait.
            An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

            Please push the back button and reload the previous window.'
            An unexpected error was returned: 'Your submission could not be processed because the token has expired.

            Please push the back button and reload the previous window.'
            An internal error has occurred and the module cannot be displayed.
            There are no results that meet this criteria.
            Search Result for "|||"