Garage Floor Paint/Epoxy Coatings. (Suggestions?) - NCRS Discussion Boards

Garage Floor Paint/Epoxy Coatings. (Suggestions?)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Patrick H.
    Beyond Control Poster
    • December 1, 1989
    • 11626

    #16
    Re: What year Corvette is that?!!

    John's is 2500 sq ft.

    Patrick

    been there, walked on it
    Vice-Chairman (West), Michigan Chapter NCRS
    71 "deer modified" coupe
    72 5-Star Bowtie / Duntov coupe. https://www.flickr.com/photos/124695...57649252735124
    2008 coupe
    Available stickers: Engine suffix code, exhaust tips & mufflers, shocks, AIR diverter valve broadcast code.

    Comment

    • John H.
      Beyond Control Poster
      • December 1, 1997
      • 16513

      #17
      Re: Garage Floor Paint/Epoxy Coatings. (Suggestion

      Pat -

      Mine was a freshly-poured new floor; I let it cure for three months, then had the steel shot-blast and epoxy coating done. The shot-blasting does two things - gets it absolutely clean, and removes the "skin" on the concrete so the epoxy has open pores in the concrete to bond to.

      Comment

      • Earl G.
        Expired
        • September 30, 2001
        • 66

        #18
        Re: Garage Floor Paint/Epoxy Coatings. (Suggestion

        John,

        Is the surface of the floor slick after the application and/or does any water make the surface slick?

        Gunner

        Comment

        • Patrick H.
          Beyond Control Poster
          • December 1, 1989
          • 11626

          #19
          Re: Garage Floor Paint/Epoxy Coatings. (Suggestion

          I don't think Art's barn floor was very old either, and he had the same system installed. When we all visited last June, it was quite recently applied.

          Patrick
          Vice-Chairman (West), Michigan Chapter NCRS
          71 "deer modified" coupe
          72 5-Star Bowtie / Duntov coupe. https://www.flickr.com/photos/124695...57649252735124
          2008 coupe
          Available stickers: Engine suffix code, exhaust tips & mufflers, shocks, AIR diverter valve broadcast code.

          Comment

          • John M.
            Expired
            • January 1, 1999
            • 1553

            #20
            Re: Garage Floor Paint/Epoxy Coatings. (Suggestion

            Gunner,
            I don't know that the floor is any slicker than the polished concrete that it replaced. I wet sand on cars in the shop all the time, and have never had a time where It felt slippery. I do have Tennis shoes on whenever I am out there, so it might be more so with regular shoes. There is an additive that can be broadcast before the final coat to give more traction, but I didn't use it since I wanted as easy-to-clean a floor as possible.

            Regards, John McGraw

            Comment

            • John H.
              Beyond Control Poster
              • December 1, 1997
              • 16513

              #21
              Re: Garage Floor Paint/Epoxy Coatings. (Suggestion

              Earl -

              I had them very lightly sprinkle some fine silica sand (NOT "play" sand) in the final epoxy coat before it cured, which provides some anti-slip when the floor is wet. Doesn't interfere with sweeping it - I use a push broom with long, soft splayed bristles, wet or dry.

              Comment

              • John H.
                Beyond Control Poster
                • December 1, 1997
                • 16513

                #22
                Re: Garage Floor Paint/Epoxy Coatings. (Suggestion

                Here's a shot of the finished "Home-Pro" epoxy floor in Art's "barn"; he had flakes put in the final coat that aren't apparent in this shot - see the separate link below for a closer shot that shows the flakes.
                Attached Files

                Comment

                • William Holder

                  #23
                  Re: Garage Floor Paint/Epoxy Coatings. (Suggestion

                  Hello
                  Are there any problems with Jackstands and floorjacks etc making marks in the finnish? Are these working (ie engine trans removeal rebuilds? or just storage garages?
                  Thanks
                  Bill

                  Comment

                  • John H.
                    Beyond Control Poster
                    • December 1, 1997
                    • 16513

                    #24
                    Re: Garage Floor Paint/Epoxy Coatings. (Suggestion

                    I drop LOTS of things, and haven't been able to hurt it yet; automotive chemicals (including brake fluid) don't faze it either.

                    Comment

                    Working...
                    Searching...Please wait.
                    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                    Please push the back button and reload the previous window.'
                    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                    Please push the back button and reload the previous window.'
                    An internal error has occurred and the module cannot be displayed.
                    There are no results that meet this criteria.
                    Search Result for "|||"