Wire Color/Gauge - NCRS Discussion Boards

Wire Color/Gauge

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Daniel K.
    Expired
    • April 1, 2002
    • 190

    Wire Color/Gauge

    What color(s) should the wire be that connects to the TI harness coming out of the fire wall?

    Thanks for your help. Dan K.
  • Donald O.
    Extremely Frequent Poster
    • May 31, 1990
    • 1585

    #2
    For What year Vette? *NM*

    The light at the end of the tunnel has been turned off.

    Comment

    • Daniel K.
      Expired
      • April 1, 2002
      • 190

      #3
      Re: For What year Vette?

      Donald,

      This is a 65 Coupe. Engine is 396. Thanks Dan K.

      Comment

      • John H.
        Beyond Control Poster
        • December 1, 1997
        • 16513

        #4
        Re: Wire Color/Gauge

        '65 wiring diagram shows the feed from the ignition switch is an 18-ga. black/pink wire (connects to the white wire in the T.I. harness).

        Comment

        • Daniel K.
          Expired
          • April 1, 2002
          • 190

          #5
          Re: Wire Color/Gauge

          Thanks John.

          The wire I have is black with a painted on red stripe..........

          Any idea how far this wire goes past the fire wall and do you know if this wire can be replaced for judging purposes?

          Thanks for your help. Dan K.

          Comment

          Working...
          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"