4)four 3/8" bolts are installed to hold the trunk/deck lid springs in the towers. Thread length is 1 1/4" on one end and 2" on the other...Question is which length goes up? and does the top have two nuts and the bottom one self locking nut? ( best I can tell, the AIM only shows one nut,top and bottom? )
-
-
Re: C1 Trunk/Deck Lid Tower
Dennis,
The long thread goes down and the locking nut goes on the bottom. The two thin nuts go either side of the trunk hinge bracket. You will find a thin wrench a real plus here as it is hard to get a standard wrench in between the washer on top of the spring and the bracket.
Regards, John McGraw -
John, T.U.for the help *NM*
Comment
Comment