67 327 engine bracket colors

[Chuck]

Hi,

For a 67 327, does anyone know the correct color paint for the distributor hold down clamp wire? How about the square washer? bolt?

Also, anyone know the correct color of the alternator bracket, semi-gloss black? the alt bolt through bracket?

Thanks, Chuck

[Joe C.]

Re: 67 327 engine bracket colors

Chuck:

Hold down assembly is black, and the bolt is black phosphate.

[Chuck]

Re: 67 327 engine bracket colors

Thanks for the quick answer! Alt bracket is black too.
Thanks, Chuck

[Gene M.]

Re: 67 327 engine bracket colors

Your small block upper alt. brkt is black the lower one is orange as it is loose on the engine when painted.

[Chuck]

Re: 67 327 engine bracket colors

Then bolt must be orange too, correct?

[John H.]

Re: 67 327 engine bracket colors

The bottom bolt on the lower bracket (the one that's shown in the A.I.M. to be loosened, then re-torqued after alternator installation) was installed at Flint Engine, so it was painted with the engine; the other bolts and the upper brace were installed at St. Louis.

[Mark H.]

Same for '64? *NM*

[Joe C.]

Yes *NM*