'62 Rubber Bushings - NCRS Discussion Boards

'62 Rubber Bushings

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • William R.
    Frequent User
    • February 1, 2001
    • 40

    '62 Rubber Bushings

    Am looking for correct front & rear stabilizer bushings. All that I have found so far are 1/2" too narrow for front & 1/4" too narrow for rear. Original fronts are 1-3/4" wide & rears are 1-1/2" wide. Any help would be appreciated.
  • Bernie Schneider

    #2
    Re: '62 Rubber Bushings

    Good Luck! I've been looking actively for about a year with no luck.

    Comment

    • William R.
      Frequent User
      • February 1, 2001
      • 40

      #3
      Re: '62 Rubber Bushings

      I received an email after my original posting suggesting I try Mary Jo. I ordered the front bushings this past Wed & received them yesterday. They are correct. She also lists correct ones for the rear.
      Bill #35619

      Comment

      Working...
      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"