body dolly for C-3 anyone have specks?? - NCRS Discussion Boards

body dolly for C-3 anyone have specks??

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • John P.
    Expired
    • February 18, 2010
    • 160

    body dolly for C-3 anyone have specks??

    anyone have measurements and build plans for a body dolly
    Just like to know if anyone has them so Ill have them for the future removal of my body,
    I was thinking of hitting the lowes for all my supplies =0)
    maybe not the wheels but its been a long time since I have been to a lowes

    thanks

    johnny
  • John A.
    Expired
    • August 31, 2002
    • 172

    #2
    Re: body dolly for C-3 anyone have specks??

    Johnny,

    You'll have to pick up a copy of "The Body Lift Workbook" by Nolan Adams...(comes with a video) ... has all measurements and material list... get it at the NCRS Book shop!

    John

    Comment

    • Bob Unkel

      #3
      Re: body dolly for C-3 anyone have specks??

      The plans in Nolan's book are for earlier vintage bodies, but all that is needed for C3 is to add a 4 x 4 on top of front cross piece of dolly. I used one a little longer than the plan cross piece and it works great. The dolly as designed is not high enough to properly support the front of the body. All other supports are in the correct location and position.
      While at lumber yard you can also get enough wood to make a lift structure to use to remove body from frame. Mine is a little overkill, but it worked great. Used it to support frame for painting and to remove engine from chassis. Don't have plan, but may be able to find a picture.

      Comment

      • kelly theaker

        #4
        Re: body dolly for C-3 anyone have specks??

        by the way i am justy finishing up with the ultimate body dolly, this system adjusts to all body styles and supports the front and rear of the c3 , a big problem of flex. get in touch, i,m not giving it away but i may sell . i am located in ontario and this system can be broke down nicely.It was an incredible help in my body off, i am just finishing the second prime so about six months away.

        Comment

        • Larry M.
          Expired
          • December 1, 1986
          • 541

          #5
          Re: body dolly for C-3 anyone have specks??

          Johnny -

          I have photocopies of four old Restorer articles that have plans for dollies and body supports, as well as a copy of the plans from the Nolan Adams workbook. E-mail me your address, I'll send you copies.

          Larry Maher, #10731

          Comment

          • Harmon C.
            Extremely Frequent Poster
            • August 31, 1994
            • 3228

            #6
            Re: body dolly for C-3 anyone have specks??

            I have the plans I made for a body dolly for 1973's it is made out of 2" square tubing and all body mounts bolt up as on the frame. The doors can be shimed and checked for fit. I used it for painting.
            Lyle

            Comment

            Working...
            Searching...Please wait.
            An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

            Please push the back button and reload the previous window.'
            An unexpected error was returned: 'Your submission could not be processed because the token has expired.

            Please push the back button and reload the previous window.'
            An internal error has occurred and the module cannot be displayed.
            There are no results that meet this criteria.
            Search Result for "|||"