PO-2 wheelcover restoration - NCRS Discussion Boards

PO-2 wheelcover restoration

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Shannon Burgess
    #1

    PO-2 wheelcover restoration

    Can anyone provide some input as to the best way to clean and refinish PO-2 wheelcovers? I bought a used set and they have cleaned up OK, but the inside of the "fins" look a little worse for wear. Can the wheelcover be disassembled and the fins repainted?

    Any advice is much appreciated,
    Shannon
    Tags: None
      • Top
    • Harmon C.
      Extremely Frequent Poster
      • August 31, 1994
      • 3228
      #2
      Re: PO-2 wheelcover restoration

      They can be taken apart for cleaning and painting. I think some one with air brush skills may be able to get good results but I tried masking tape and didn't like the results as compared to the original paint. I bought 2 sets and mixed the parts to make one real good set.
      Lyle

        • Top

        Comment

        Previous template Next
        Working...
        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"