Correct cooler hose material PG Trans - NCRS Discussion Boards

Correct cooler hose material PG Trans

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Al R.
    Very Frequent User
    • June 30, 1988
    • 687

    Correct cooler hose material PG Trans

    Does anyone have a source for the correct OD & smooth outer surface hose used for the PG transmission cooler ( hoses connect the steel lines to the cooler) This hose was also used for the power steering pump return line. I can find a hose with almost the same OD & ID, but it has a type of cross-hatching re-inforcement raised up into the outer rubber skin. The slick surface ones that I find have a smaller OD than the original hose. What would be the point deduction on the incorrect material. BTW, my old hoses were cracked and too hard to try to re-use. If a correct type hose is available, please post the source as I know others have the same problem.
Working...
Searching...Please wait.
An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

Please push the back button and reload the previous window.'
An unexpected error was returned: 'Your submission could not be processed because the token has expired.

Please push the back button and reload the previous window.'
An internal error has occurred and the module cannot be displayed.
There are no results that meet this criteria.
Search Result for "|||"