66 blower motor rebuild - NCRS Discussion Boards

66 blower motor rebuild

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jim S.
    Extremely Frequent Poster
    • March 1, 1986
    • 1402

    66 blower motor rebuild

    You guys were so good at recommending people to rebuild a wiper motor on a previous post, so I was hoping you might oblige me on a blower motor. I ran this question once before a while back, but didn't get anywhere with it .So I thought I would try one more time .

    It is off a 66 , and as far as I know it works now . However it is an original, off my A/C car, so one can assume that it has been used a lot, and now that it is out , it would be the perfect time to R&R it . The problems are, (a) it is a sealed unit (welded together) so it won't come apart easily and that eliminates me from doing it, and (b) as you already know, is replaceable with a new GM unit , however they do not look the same .

    So before I put it back into the restored body I would like to know it has new brushes etc.etc. and will continue to work for a long time !Your help is always appreciated !

    Jim
    Last edited by Jim S.; January 11, 2012, 11:39 PM.
Working...
Searching...Please wait.
An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

Please push the back button and reload the previous window.'
An unexpected error was returned: 'Your submission could not be processed because the token has expired.

Please push the back button and reload the previous window.'
An internal error has occurred and the module cannot be displayed.
There are no results that meet this criteria.
Search Result for "|||"