1970 radiator assembly question - NCRS Discussion Boards

1970 radiator assembly question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Greg H.
    Expired
    • June 2, 2008
    • 254

    1970 radiator assembly question

    Hi guys,
    I have a1970 L46. The radiator overflow tube is supposed to go through a clip attached to the radiator tank. I have the clip but it was installed backwards and not being used. The tube goes first to the side wall of the engine compartment through a plastic strap that looks original. It then goes down next to the lower radiator inlet. I would like to confirm the proper routing for this tube but can't find it clearly in the chassis service manual. Using the clip as described in the JG doesn't really fit very well as the tube would be pressed tight between the lower inlet and the radiator tank and fan shroud. It fits better as it is. Could it be correct?
    Anyone with an original L46 or LT1 that has pics?
    Thanks,
    Greg
Working...
Searching...Please wait.
An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

Please push the back button and reload the previous window.'
An unexpected error was returned: 'Your submission could not be processed because the token has expired.

Please push the back button and reload the previous window.'
An internal error has occurred and the module cannot be displayed.
There are no results that meet this criteria.
Search Result for "|||"