1970 Frame Marking - NCRS Discussion Boards

1970 Frame Marking

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jack C.
    Extremely Frequent Poster
    • September 30, 1992
    • 1090

    1970 Frame Marking

    Is the number 10 within the circle consistent with an original frame marking? Thanks



    Attached Files
    Jack Corso
    1972 Elkhart Green LT-1 Coupe 43,200 miles
    Top Flight 1994, 2018 & 2021
  • Terry M.
    Beyond Control Poster
    • September 30, 1980
    • 15599

    #2
    Re: 1970 Frame Marking

    Originally posted by Jack Corso (21713)
    Is the number 10 within the circle consistent with an original frame marking? Thanks



    We3 see that mark on many early C3 frames. It is not unique to 1970. I wish I knew what it means.
    Terry

    Comment

    • Jack C.
      Extremely Frequent Poster
      • September 30, 1992
      • 1090

      #3
      Re: 1970 Frame Marking

      Originally posted by Terry McManmon (3966)
      We3 see that mark on many early C3 frames. It is not unique to 1970. I wish I knew what it means.
      Thanks Terry!
      Jack Corso
      1972 Elkhart Green LT-1 Coupe 43,200 miles
      Top Flight 1994, 2018 & 2021

      Comment

      • Eric E.
        Very Frequent User
        • November 1, 1998
        • 254

        #4

        Comment

        • Ron G.
          Very Frequent User
          • December 1, 1984
          • 865

          #5
          Re: 1970 Frame Marking

          I agree with the other replies that this is regularly seen.
          "SOLID LIFTERS MATTER"

          Comment

          • Mike E.
            Extremely Frequent Poster
            • February 28, 1975
            • 5138

            #6
            Re: 1970 Frame Marking

            Originally posted by Eric Eade (31337)
            If I remember correctly there is a similar mark on the frame “upper shock mount rail” that runs parallel over the rear axle housing on C1 too.
            Eric,
            I knew you were more than just a pretty face!

            Comment

            • Allen N.
              Very Frequent User
              • January 1, 2003
              • 288

              #7
              Re: 1970 Frame Marking

              I have several of them on my frame, and I am pretty sure I have at least one 30 in a circle. I have no idea what they mean.

              Comment

              • Richard M.
                Super Moderator
                • August 31, 1988
                • 11323

                #8
                Re: 1970 Frame Marking

                1959 Shock Crossmember.


                1967 Gusset and Crossmember. (-10 and -40)


                Attached Files
                Last edited by Richard M.; December 16, 2017, 09:19 AM.

                Comment

                • Eric E.
                  Very Frequent User
                  • November 1, 1998
                  • 254

                  #9
                  Re: 1970 Frame Marking

                  Originally posted by Mike Ernst (211)
                  Eric,
                  I knew you were more than just a pretty face!

                  Comment

                  • Blair K.
                    Very Frequent User
                    • September 27, 2012
                    • 170

                    #10
                    Re: 1970 Frame Marking

                    Numerous number -10 within a circle markings on my early '68 frame.

                    Page 11 - 12 of Joseph A Tripoli Jr's Corvette Chassis Restoration Guide (1st edition) shows the marking - although he indicated he was unclear what it meant.

                    Comment

                    • Tom R.
                      Extremely Frequent Poster
                      • June 30, 1993
                      • 4099

                      #11
                      Re: 1970 Frame Marking

                      Originally posted by Eric Eade (31337)
                      Mike, It’s interesting the things that you remember and the easy things that you don't.

                      When I first saw the marks I wondered if the were a type of QC stamp to show that they passed measure checks. Always wondered if I would see a miss stamp or a double hit.
                      That's my guess...quality control! And for the metal stamp company rather than Corvette assembly plant.
                      Tom Russo

                      78 SA NCRS 5 Star Bowtie
                      78 Pace Car L82 M21
                      00 MY/TR/Conv

                      Comment

                      Working...
                      Searching...Please wait.
                      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                      Please push the back button and reload the previous window.'
                      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                      Please push the back button and reload the previous window.'
                      An internal error has occurred and the module cannot be displayed.
                      There are no results that meet this criteria.
                      Search Result for "|||"