what is correct finish on headlight linkage - NCRS Discussion Boards

what is correct finish on headlight linkage

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Richard R.
    Very Frequent User
    • January 4, 2010
    • 267

    what is correct finish on headlight linkage

    working on putting the headlights back together on my 69 L46.

    how should the linkage be finished? Picture below. From what I can tell it seems the attaching bracket shaped like an M was painted semi gloss black, and so was the middle L shape piece. and it looks like the end that has the switch on it was not finished. But the thing has had multiple paints and oversprays and I just wanted to make sure I got it right.

    Also, what finish is on the mounting bolts for the support, rods and assembly?

    Other parts that I have finished include the main support bracket with semi gloss black, headlight cups with gloss black, support rods with semi gloss black. Vacuum actuators were refinished by Bob Demmel and turned out nice.

    I haven't touched the springs yet but I think I might just replace them.

    Thanks for your help!

    Rich
    Attached Files
Working...
Searching...Please wait.
An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

Please push the back button and reload the previous window.'
An unexpected error was returned: 'Your submission could not be processed because the token has expired.

Please push the back button and reload the previous window.'
An internal error has occurred and the module cannot be displayed.
There are no results that meet this criteria.
Search Result for "|||"