Clup, Checking back on TH400 Yoke Freeplay... - NCRS Discussion Boards

Clup, Checking back on TH400 Yoke Freeplay...

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Dennis C.
    NCRS Past Judging Chairman
    • January 1, 1984
    • 2409

    Clup, Checking back on TH400 Yoke Freeplay...

    Wheelbase of "Corvette" is approx 115", quite close to that of a '57 Nomad. Present driveshaft is approx 52" c/l to c/l. Looks to need about 1" removed if desired freeplay is 1/2" to 5/8"... Please advise if you agree or disagree. Thanks, Dennis
Working...
Searching...Please wait.
An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

Please push the back button and reload the previous window.'
An unexpected error was returned: 'Your submission could not be processed because the token has expired.

Please push the back button and reload the previous window.'
An internal error has occurred and the module cannot be displayed.
There are no results that meet this criteria.
Search Result for "|||"