I am completing frame off restoration on my 67 L68 427 air car and need confirmation on the correct routing and mounting of the heater hoses. At the top left hand corner of page 416 of Nolan Adams Restoration Guide Vol. 2 there is a photo of an engine with the A/C mounting brackets like on my car as opposed to the mounting brackets for the A/C and heater hoses in the photo below it. Is it correct for the hoses to lay over and against the A/C compressor without an attachment for the heater hoses as shown in the top photo. As you will note the oil filler cap is chrome and the plug ground wire attachments are incorrect so just want to confirm that this photo shows heater hose routing and mounting correctly. Your help in clarifying this issue will be appreciated.