Re: 64 seat installation confusion - NCRS Discussion Boards

Re: 64 seat installation confusion

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • James W.
    Extremely Frequent Poster
    • December 1, 1990
    • 2655

    Re: 64 seat installation confusion

    Hello Phil,

    My 1964 VIN #9258, built January 17, 1964 has the cut-out in the carpet for the front seat track to sit directly on the floor pan. The carpet flaps are cut so that they hinge from the center or the middle the seat and fold back over to cover the seat bolts. The restof the seat track sits on top ofthe carpet.

    I replaced the front carpets in my '64 last fall and had it flight judged where it received no deductions for the seat track carpet flap configuration. The third edition of the 63/64 judging manual explains how the carpet flaps are to be cut. I can send you a picture of my installation if you would like, I'd be glad to help in any way I can. Please email me at jwest@oppd.com and I'll send you some pictures.

    Best Regards,

    James West
Working...
Searching...Please wait.
An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

Please push the back button and reload the previous window.'
An unexpected error was returned: 'Your submission could not be processed because the token has expired.

Please push the back button and reload the previous window.'
An internal error has occurred and the module cannot be displayed.
There are no results that meet this criteria.
Search Result for "|||"